DPLASER G6524CG 2-Chuck Laser Tube Cutter

DPLASER G6524CG 2-Chuck Laser Tube Cutter: 100m/min Speed + ±0.02mm/m Accuracy – Efficiency Revolution for SMEs

For SMEs with annual revenue of 7M−30M (¥5-20M), tight lead times and lost precision orders are universal pain points. DPLASER’s new G6524CG 2-chuck laser tube cutter – featuring 100m/min cutting speed and ±0.02mm/m accuracy – empowers SMEs with a “speed + precision” survival edge.

Traditional 2-chuck cutters max out at ≤60m/min (XY-axis speed). G6524CG shatters this limit with:

Lightweight transmission structure + Professional industrial pipe cutting system

• 100m/min XY-axis speed (TOP 5% in same-class industrial laser tube cutting machines) Case: Φ50mm×2mm round tube cutting
• Traditional: 28s per tube → G6524CG: 18s per tube
• 8-hour output: Traditional ≈600pcs → G6524CG ≈1100pcs (53% capacity boost)
• Applications: Automotive seat frames, bicycle/motorcycle frames, furniture legs (small-batch/high-mix), medical bed tubes (precision small orders), and other metal tube mass production scenarios.

SMEs often lose premium orders due to “poor cutting accuracy (≥±0.05mm/m)”. G6524CG crushes this barrier with:

• High-precision ball screws + servo motor closed-loop control
• Positioning accuracy: ±0.02mm/m
• Repeat positioning accuracy: ±0.02mm/m Customer Case: Wenzhou O*long Sanitary Ware cuts 12mm thick-walled square tubes (for premium shower heads).
• Traditional cutter: 0.2mm hole deviation → assembly jams
• G6524CG: Deviation ≤0.02mm → directly serves international brands, $0.43 profit increase per tube (¥3 RMB).

For complex orders (bent tubes, irregular-shaped tubes), G6524CG delivers:

• W1/W2 infinite rotation axis (360° continuous rotation)
• 1.5G maximum acceleration ✅ Enables: Guardrail bent tubes “one-pass cutting” (no segment clamping)

Front Chuck Servo Turn-Cut Technology: Achieve True Zero Remnant Cutting

• How to achieve zero remnant? The G-Series front chuck assembly, servo motor-controlled for precise positioning, grips the tube via its pneumatic chuck clamp. With the rear chuck released, the front chuck alone performs the final turn-and-cut operation.
• This eliminates the remnant waste inherent in traditional chuck-change processes, significantly boosting material utilization (especially valuable for precious metal tubes) and further reducing cutting costs.

Book G6524CG On-Site Test to get: ✅ Free capacity bottleneck analysis of existing equipment ✅ Custom “small-batch fast response” cutting solution (including time/cost calculation)